2500 kVA Substation Transformer
- Primary Voltage Ratings: 24.94kV( other you need)
- Secondary Voltage Ratings: 480GrdY/277V( other you need)
- CONNECTION TYPE: Dyn1( other you need)
- TYPE: Substation
- BIL: 30-125kV
- Standards: CSA C88-16, IEEE C57
- Application: Distribution system, EV charging, BESS, Bitcoin mining, Industry, Renewable energy
- Power Rating: 2500 kVA, 2.5 MVA
- Certificate: UL, cUL, CSA
Customizable with cover-mounted or side-mounted bushings. Complies with UL/cUL, CSA standards, and third-party test reports. At Daelim Transformer, we understand that every project comes with unique requirements. That's why we offer customizable transformers, allowing you to adjust voltage, capacity, and parameters to perfectly align with your needs.The 2500 kVA substation transformer is specifically designed for the Canadian distribution system and is compliant with the CSA C88-16 standard, which is the applicable standard in Canada for distribution transformers. This transformer utilizes a vegetable oil-based insulating liquid with a low ignition point, which offers improved fire safety compared to traditional mineral oil. The use of vegetable oil as the insulating liquid is environmentally friendly and helps reduce the overall environmental impact of the transformer. The transformer employs the KNAN (K) cooling method, which stands for "Natural cooling with Air Natural." This means that the transformer relies on natural convection and ambient air circulation for cooling, without the use of any forced cooling mechanisms such as fans.
Quote Now
2500 kVA Transformer Accessories
The SL-2500-24.94-0.48 transformer is designed with a primary voltage of 24.94 kV in a delta configuration and a secondary voltage of 480 GrdY/277. It has a capacity of 2500 kVA. This transformer utilizes an environmentally friendly insulating liquid, specifically a degradable vegetable oil with a low flash point. It is classified as a KNAN transformer.
The main fittings of the SL-2500-24.94-0.48 transformer are the following:
| HV BUSHING (25kV 4 Hole ) | 3 | PRESSURE RELIEF DEVICE | 1 |
| LV BUSHING 8 Hole | 4 | NAME PLATE(STAINLESS STEEL) | 1 |
| RADIATORS | 4 | LIQUID LEVEL INDICATOR | 1 |
| HANDHOLE | 2 | LIFTING HOOK FOR COMPLETE TRANSFORMER | 4 |
| THERMOMETER | 1 | THROAT FLANGE,HV | 1 |
| 1 | THROAT FLANGE,L.V | 1 | |
| 1”UPPER FILL VALVE | 1 | BASE WELDED TO TANK | 1 |
| EXTERNAL 1DRAIN VALVE | 1 | LIFTING EYE FOR ACTIVE PART WITH TANK COVER | 4 |
| DRAIN VALVE GUARD | 1 | GROUND PAD ON TANK WALL | 4 |
| VACUUM PRESSURE GAUGE | 1 | TAP CHANGER | 1 |
| TERMINAL BLOCK | 1 | INSTRUMENT BOX | 1 |
2500 kVA (2.5 MVA) Substation Transformer Drawing
The SL-2500-24.94-0.48 transformer is specifically designed for the Canadian market and follows the standards set by the CSA (Canadian Standards Association). It features a side mount design for both the high voltage and low pressure components. The low voltage ground configuration is utilized.
For the connections, the transformer uses the Dyn1 configuration, which refers to a Delta (Δ) primary winding and a Wye (Y) secondary winding connection with neutral brought out. This configuration is commonly used for three-phase transformers and offers a balanced power distribution.
The instrumentation of the transformer is located inside a sealed enclosure, ensuring the protection and safety of the internal components.
Get Price
2500kVA Transformer
2500kVA-Transformer-Workshop
2000 kVA Transformer Package
2500 kVA Substation Transformer
Other 2500 kVA Substation Transformer
34.5kV 2500 kVA Transformer
The SL-2500(3000)kVA/34.5/0.48 transformer is designed in compliance with the CSA C88 standard. It employs the KNAN/KNAF cooling method, providing two different power ratings based on the cooling configuration.
Under normal operating conditions with natural cooling (KNAN), the transformer has a capacity of 2500kVA. However, when the fan is activated, enabling forced air cooling (KNAF), the power rating increases to 3000kVA.
The main technical parameters of the SL-2500(3000)kVA/34.5/0.48 transformer are following:
| HV | 34500V | Width(mm) | 86.6 inch |
| LV | 480GrdY/277V | Length(mm) | 104.4 inch |
| Applied Standard | CSA C88-16 | Height(mm) | 85 inch |
| Method | KNAN/KNAF | Oil weight | 1750KG |
| Power rating | 2500/3000 kVA | Total weight | 6600KG |
| Winding material | ALUMINIUM | Rated Frequency | 60Hz |
| Vector Group | Dyn1 | No. OF TAP POSITION | 5 |
Learn more about Substation Transformer
Send Inquiry Now13.8 kV 2500 kVA Transformer
The SL-2500(2800)kVA/13.8/0.24 transformer is designed in compliance with the IEEE standard. It operates with a primary voltage of 13800V and a secondary voltage of 240V. The transformer has a K-factor value of 13, indicating its ability to handle non-linear loads effectively.
In terms of design, both the high and low voltage sides of the transformer adopt a side-mount layout. Additionally, the transformer is equipped with a sealed cover, ensuring protection and containment of the internal components.
- Phase: 3Ø
- Capacity: 2500kVA/2800kVA
- Rated Primary Voltage: 13800V
- Rated Secondary Voltage: 240V
- Rated Primary Current: 104.6A
- Rated Secondary Current: 6014.1A
- Core Type: Wound
- Vector Group: Dyn 11
- Oil Volume: 2328L
- Total Weight: 6927 kg
- Insulation Primary Level: LI/AC: 95/34 kV
- Insulation Secondary Level: LI/AC: 30/10 kV
- Applied Standard: "IEEE Std C57.12.00, IEEE Std C57.12.36"
You may enjoy: Pad Mounted Transformer
Get Price
DOE
AS
GOST